Short Lead Time for Concrete Cube Mould - High pressure,High temperature filtration – Taige
Short Lead Time for Concrete Cube Mould - High pressure,High temperature filtration – Taige Detail:
TG-170 Series HTHP Filter Presses
TG-170 series high temperature and pressure fluid loss is a special device which is mainly used to measure drilling fluids loss and later produce it into the mud pies. It is mainly made up of one scyphus, one pressure hose, one filter gauze, and strain of the base cover. The scyphus is used to put drilling fluids sample. The instrument is made up of stainless scyphus, heating jacket, PDI auto constant temperature controller, stainless housing, outside heating insulating layer. The use of the period is long. The precision is high, close error. It is safe and easy to operate, ant the data is precious. It has already been used in all kinds of oilfield, scientific institute, lab and other departments.
Model and Specifications
|
Name |
HTHP Filtration |
||||
|
Model |
TG-170-00 |
TG-170-01 |
TG-170-02 |
TG-171-01 |
TG-171-02 |
|
Dimensions (cm) |
15×20×53cm |
20×20×57cm |
26×25×56cm |
21×31×76cm |
35×31×76cm |
|
Weight (kg) |
21kg |
24kg |
26kg |
40kg |
45kg |
|
Input Voltage |
AC220V±5% 50Hz |
||||
|
Power （KW） |
0.4W |
|
|
1KW |
1.5KW |
|
Maximum Temperature（℃） |
150℃ |
232℃ |
|||
|
Maximum Pressure （MPa） |
4.2MPa |
7.1MPa |
|||
|
Maximum Returning Pressure （MPa） |
0.7MPa |
3.5MPa |
|||
|
Mesh Area （cm2） |
22.6cm2 |
||||
|
Cup Capacity (ml） |
175ml |
500ml |
|||
|
Name |
HTHP Dynamic Filtration |
Return Pressure Receiver |
|
|
Model |
TG-172-50 |
TG-170-20 |
TG-171-20 |
|
Dimensionss (cm) |
46×25×78cm |
10×6×13cm |
10×6×16cm |
|
Weight (kg) |
75kg |
1.5kg |
1.9kg |
|
Power Supply |
AC220V±5% 50Hz |
— |
— |
|
Power（KW） |
1.2W |
— |
— |
|
Speed Adjustable Range （r/min） |
0～800 r/min |
— |
— |
|
Maximum Temperature of Static Filtration （℃） |
232℃ |
— |
— |
|
Maximum Temperature of Dynamic Temperature Filtration （℃） |
150℃ |
— |
— |
|
Maximum Pressure （MPa） |
7.1MPa |
0.7MPa |
3.5MPa |
|
Maximum Return Pressure （MPa） |
3.5MPa |
— |
— |
|
Mesh Area （cm2） |
22.6cm2 |
— |
— |
|
Cup Capacity （ml） |
500ml |
— |
— |
TG-70 series high temperature and pressure fluid loss is a special device which is mainly used to measure drilling fluids loss and later produce it into the mud pies. It is mainly made up of one scyphus, one pressure hose, one filter gauze, and strain of the base cover. The scyphus is used to put drilling fluids sample. The instrument is made up of stainless scyphus, heating jacket, PDI auto constant temperature controller, stainless housing, outside heating insulating layer. The use of the period is long. The precision is high, close error. It is safe and easy to operate, ant the data is precious. It has already been used in all kinds of oilfield, scientific institute, lab and other departments.
Product detail pictures:
Related Product Guide:
Investec Asset Management North America Decreased Tim Participacoes Sa (TSU) Holding; SIKA AG ORDINARY SHARES (SKFOF) SI Increased By 26.7% | Organic Chemicals Additives
FACT CHECK: Are All These Chemicals Found in a Banana? | Organic Chemicals Additives
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Short Lead Time for Concrete Cube Mould - High pressure,High temperature filtration – Taige, The product will supply to all over the world, such as: Milan , Milan , Armenia , It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We provide wholesale prices on all our quality parts so you are guaranteed greater savings.
By Alberta
from Netherlands
- 2015.03.03 13:09
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Priscilla
from Turkey
- 2016.11.11 11:41
