One of Hottest for Flagon And Cups - Retarder Medium-low Temperature – Taige
One of Hottest for Flagon And Cups - Retarder Medium-low Temperature – Taige Detail:
Medium-low temperature retarder XBA-103L
Introduction
XBA-103L is a medium-low temperature retarder.
XBA-103L’s applicable temperature is 30~90℃(BHCT).
XBA-103L is applicable to brine system.
XBA-103L’s recommended dosage is 0.2~3.0%(BWOC).
XBA-103L is liquid and used through wet mixing.
XBA-103L’s dosage is adjustable according to cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-207L |
colorless or light red liquid |
0.2~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Thickening time，min |
80℃，46.5MPa，45min |
≥130 |
|
|
Initial consistency, Bc |
≤30 |
||
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Free fluid, % |
80℃，0.01MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，21MPa |
≥14 |
|
|
Slurry composition |
API class G (HSR)800g，fresh water，XBA-103L 4g(0.5%)，defoamer 1.2g（0.15%）；Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
|
Note |
The thickening time is adjustable as the different dosage of XBA-103L. | ||
Packaging and Storage
Packaging: XBA-103L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Gotta Be a Conclusion In Here Somewhere | Concrete Retardant Additives
Scientists develop smart technology for synchronized 3-D printing of concrete | Organic Chemicals Additives
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of One of Hottest for Flagon And Cups - Retarder Medium-low Temperature – Taige, The product will supply to all over the world, such as: Oman , Madagascar , Angola , The company attaches great importance to product quality and service quality, based on the business philosophy "good with people, genuine to whole world, your satisfaction is our pursuit". we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
By Henry
from Munich
- 2015.06.18 19:26
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Megan
from Anguilla
- 2015.02.08 16:45
