OEM/ODM Manufacturer Polyelectrolyte Blocking Agents Eor Anion Anionic Polyacrylamide Apam Phpa
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for OEM/ODM Manufacturer Polyelectrolyte Blocking Agents Eor Anion Anionic Polyacrylamide Apam Phpa, We follow giving integration remedies for patrons and hope to make long-term, secure, sincere and mutual beneficial interactions with clients. We sincerely sit up for your check out.
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Anion Anionic Polyacrylamide, Apam Phpa, Fluids Loss Additive Petroleum Agents, Our company will continue to adhere to the ” superior quality, reputable, the user first ” principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
80℃，6.9MPa |
≤50 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
