Delivering quality-assured results on which you can depend, with excellent customer service, is our mission. Hereby, we built the independent department consisting of expert test team to provide you with professional oilfield cement and drilling fluid testing.
We offer a full range of comprehensive tests using state-of-the-art testing equipment.
Thickening Time
Thickening time of a slurry is calculated to determine the time required to mix and pump the slurry. Mixing time for the volume is estimated from calculated slurry volume and mixing rate. Mixing rate varies from rig to rig, and is dependent on slurry design. Safety time is allowed to account for any shut down or slow mixing rates that may inadvertently occur.
Compressive Strength
This test determines the compressive strength of set cement samples under confining stress.
Static Gel Strength (SGS)
This test allows an operator to study the slurry’s transition from a liquid to solid state.
Fluid Loss
The Fluid Loss test determines the relative effectiveness of a slurry, in retaining its water phase, or losing a portion of its water phase as a filtrate to a formation. Insufficient fluid loss control can result in a cement slurry dehydrating and bridging off the annulus, which can prevent the slurry from being pumped to its final location and leaving excess cement in the casing.
Rheological Testing
This test determines the apparent flow properties of well fluids.
Gas Migration
This test is used to evaluate a cement slurry’s susceptibility to invasive gas or liquid flow, by realistically simulating the well parameters including temperature, hydrostatic head pressure, fluid formation pressure and the pressure gradients that drive these invasive flows.
Post time: Nov-24-2021