Low MOQ for Rotational Viscometer - Fluid Loss Control Medium-low Temperature – Taige
Low MOQ for Rotational Viscometer - Fluid Loss Control Medium-low Temperature – Taige Detail:
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
Product |
Appearance |
Dosage |
|
Freshwater system |
Brine system |
||
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Fluid loss, mL |
80℃,6.9MPa |
≤50 |
|
Others |
Initial consistency, Bc |
80℃,46.5MPa,45min |
≤30 |
40-100Bc thickening transition time, min |
≤40 |
||
Thickening time, min |
≥70 |
||
Free fluid, % |
80℃,0.1MPa |
≤1.4 |
|
24h compressive strength, MPa |
102℃,20.7MPa |
≥14 |
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g(0.15%).Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). |
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Chemical Additives Information
Cooking with ‘pure chemical compounds’ is the future of food, says Hervé This Menu Back to Back to Back to Back to Back to Back to Send Follow us on Facebook Follow us on Twitter Follow us on LinkedIn Send contact Email to a friend Facebook Twitter Linke | Cement Liquid Additives
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Low MOQ for Rotational Viscometer - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Tanzania , Los Angeles , Ukraine , Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Lillian from Puerto Rico - 2015.12.05 13:53
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Andy from Nicaragua - 2016.11.20 15:58