Low MOQ for New Stainless Steel Soap Dispenser Wall Mounted With Plastic Pump
Our firm sticks towards the basic principle of “Quality could be the life of your organization, and name may be the soul of it” for Low MOQ for New Stainless Steel Soap Dispenser Wall Mounted With Plastic Pump, Thanks for taking your worthwhile time to visit us and sit up for have a nice cooperation along with you.
Our firm sticks towards the basic principle of “Quality could be the life of your organization, and name may be the soul of it” for Stainless Steel Liquid Soap Dispenser, Stainless Steel Soap Dispenser Wall Mounted, Wall Mount Liquid Soap Dispenser, Custom orders are acceptable with different quality grade and customer’s especial design. We’ve been looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.
Oil well cement dispersant XBA-303
Introduction
XBA-303 has two types：XBA-303L (liquid ) and XBA-303S (solid);
XBA-303 could significantly reduce consistency，improve liquidity and rheological behavior of cement slurry.
XBA-303 has wide range of applicable temperature to meet the needs of high, medium and low temperature cementing requirements;
XBA-303 is resistant to salt and applicable to saturated brine.
XBA-303L only can be used through wet mixing.
XBA-303S could be used through wet or dry mixing.
XBA-303’s dosage need to be adjusted according to the performance requirements of cement slurry.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-303L |
red liquid |
0.5~4% |
|
XBA-303S |
red powder |
0.2~2% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
85℃，70.3MPa，44min |
1.0~2.0 |
|
|
Thickening linear |
正常 |
||
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
110℃，20.7MPa |
≥0.80 |
|
|
Rheological property |
rheological index n |
85℃，0.01MPa |
≥0.50 |
|
|
consistentcy coefficient k，Pa·sn |
≤0.70 |
|
|
Slurry composition |
API class G(HSR) 800g，XBA-303L 12g(1.5%) or XBA-303S 4g(0.5%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-303L is packed with 25kg barrel, XBA-303S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
