Hot-selling Fluid Loss Control Additive Sulfonated Lignite

Short Description:

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Hot-selling Fluid Loss Control Additive Sulfonated Lignite, We’re very proud of your fantastic popularity from our prospects for our products’ reputable quality.We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Smc, Sulfonated Lignite, To work with an excellent products manufacturer, our company is your best choice. Warmly welcome...

Port: Dalian, Ningbo,Guangzhou

Payment Terms: L/C,D/A,D/P,T/T

Send email to us Download as PDF

Product Detail

Product Tags

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Hot-selling Fluid Loss Control Additive Sulfonated Lignite, We’re very proud of your fantastic popularity from our prospects for our products’ reputable quality.
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Smc, Sulfonated Lignite, To work with an excellent products manufacturer, our company is your best choice. Warmly welcome you and opening up the boundaries of communication. We’ve been the ideal partner of your business development and look forward to your sincere cooperation.
Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).