Hot New Products Fracturing Fluids Viscosity - Medium-low temperature Accelerator – Taige
Hot New Products Fracturing Fluids Viscosity - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
Product |
Appearance |
Dosage(BWOC) |
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Initial consistency, Bc |
32℃,8.3MPa,17min |
≤30 |
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
6h compressive strength,MPa |
39℃,0.1MPa |
≥4.0 |
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
Slurry composition |
API class G(HSR) 800g,XBA-402S 24g(3%),fresh water,defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water)。 |
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Abu Dhabi International Petroleum Exhibition 2024
Cementing lab test, Operation & Practices
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Hot New Products Fracturing Fluids Viscosity - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Lyon , Mauritius , Israel , For anyone who is keen on any of our goods right after you view our product list, please really feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it's easy, you may locate out our address in our web-site and come to our business for far more information of our products by your self. We are always ready to construct extended and steady co-operation relations with any possible customers in the related fields.
By Mona from Jordan - 2015.07.27 12:26
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Annabelle from Lesotho - 2015.04.25 16:46