Factory selling Filter Press Api - Compound accelerator – Taige
Factory selling Filter Press Api - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-403S |
Gray powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-403S 32g(4%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
KURARAY CO LTD/ADR (KURRY) & Univar (NYSE:UNVR) Financial Review | Stirred Fluid Loss Cell
Cooking with ‘pure chemical compounds’ is the future of food, says Hervé This Menu Back to Back to Back to Back to Back to Back to Send Follow us on Facebook Follow us on Twitter Follow us on LinkedIn Send contact Email to a friend Facebook Twitter Linke | Cement Liquid Additives
We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Factory selling Filter Press Api - Compound accelerator – Taige, The product will supply to all over the world, such as: Bogota , Bulgaria , Bangladesh , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Delia
from Saudi Arabia
- 2016.06.22 12:49
We have worked with many companies, but this time is the best，detailed explanation, timely delivery and quality qualified, nice!
By Lydia
from New Zealand
- 2016.03.08 14:45
