Factory made hot-sale Electromagnetic - Compound accelerator – Taige
Factory made hot-sale Electromagnetic - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
Product |
Appearance |
Dosage(BWOC) |
XBA-403S |
Gray powder |
2~6% |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Initial consistency, Bc |
32℃,8.3MPa,17min |
≤30 |
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
6h compressive strength,MPa |
39℃,0.1MPa |
≥4.0 |
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
Slurry composition |
API class G(HSR) 800g,XBA-403S 32g(4%),fresh water,defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water)。 |
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Shenyang Taige’s Product Played a Part in Shengli Oilfield’s Projects
Expanded Perlite Market | Stirred Fluid Loss Cell
Just about every member from our large efficiency income crew values customers' wants and enterprise communication for Factory made hot-sale Electromagnetic - Compound accelerator – Taige, The product will supply to all over the world, such as: luzern , Cairo , UK , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Athena from Colombia - 2015.12.28 15:18
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Elva from Ghana - 2015.12.11 11:26