factory low price Hydroxyethyl Cellulose 99% - Fluid Loss Control Medium-low Temperature – Taige
factory low price Hydroxyethyl Cellulose 99% - Fluid Loss Control Medium-low Temperature – Taige Detail:
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
80℃，6.9MPa |
≤50 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Oil well cement, additives and cementing technology
9 Best Organic Pads | Concrete Retardant Additives
Our firm aims to operating faithfully, serving to all of our shoppers , and working in new technology and new machine regularly for factory low price Hydroxyethyl Cellulose 99% - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Singapore , Cancun , Orlando , During the development, our company has built a well-known brand. It is well highly acclaimed by our customers. OEM and ODM are accepted. We are looking forward to customers from all over the world to join us to a wild cooperation.
By Margaret
from Bangladesh
- 2015.08.12 12:27
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Michelle
from Moldova
- 2015.11.22 12:28
