China OEM Cpe135a For Pvc Additives - Compound accelerator – Taige
China OEM Cpe135a For Pvc Additives - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
Product |
Appearance |
Dosage(BWOC) |
XBA-403S |
Gray powder |
2~6% |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Initial consistency, Bc |
32℃,8.3MPa,17min |
≤30 |
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
6h compressive strength,MPa |
39℃,0.1MPa |
≥4.0 |
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
Slurry composition |
API class G(HSR) 800g,XBA-403S 32g(4%),fresh water,defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water)。 |
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Memory enhancement by ferulic acid ester across species | Cement Liquid Additives
Cementing test service items and types
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for China OEM Cpe135a For Pvc Additives - Compound accelerator – Taige, The product will supply to all over the world, such as: Albania , Colombia , Cyprus , Our products are sold to the Middle East, Southeast Asia, Africa, Europe, America and other regions, and are favorably appraised by clients. To benefit from our strong OEM/ODM capabilities and considerate services, please contact us today. We will sincerely create and share success with all clients.
By Mabel from Nicaragua - 2016.04.18 16:45
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Stephen from Provence - 2016.04.08 14:55