Cheapest Factory China Custom Precision Spare Parts for test instruments
Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we’ve been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Cheapest Factory China Custom Precision Spare Parts for test instruments, Welcome mates from all around the world occur to go to, manual and negotiate.
Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we’ve been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for China equipment Accessories, test equipment Accessories, Adhering to the management tenet of “Managing Sincerely, Winning by Quality”, we try our best to provide excellent products and service to our clients. We look forward to making progress together with domestic and international clients.
Oil well cement dispersant XBA-303
Introduction
XBA-303 has two types：XBA-303L (liquid ) and XBA-303S (solid);
XBA-303 could significantly reduce consistency，improve liquidity and rheological behavior of cement slurry.
XBA-303 has wide range of applicable temperature to meet the needs of high, medium and low temperature cementing requirements;
XBA-303 is resistant to salt and applicable to saturated brine.
XBA-303L only can be used through wet mixing.
XBA-303S could be used through wet or dry mixing.
XBA-303’s dosage need to be adjusted according to the performance requirements of cement slurry.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-303L |
red liquid |
0.5~4% |
|
XBA-303S |
red powder |
0.2~2% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
85℃，70.3MPa，44min |
1.0~2.0 |
|
|
Thickening linear |
正常 |
||
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
110℃，20.7MPa |
≥0.80 |
|
|
Rheological property |
rheological index n |
85℃，0.01MPa |
≥0.50 |
|
|
consistentcy coefficient k，Pa·sn |
≤0.70 |
|
|
Slurry composition |
API class G(HSR) 800g，XBA-303L 12g(1.5%) or XBA-303S 4g(0.5%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-303L is packed with 25kg barrel, XBA-303S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
