Anti-foam additive, defoamer agent for cementing and drilling
Defoamer
1. Product introduction
This product is made of defoamer with polyether as main component and special technology. It has a strong alkali resistance (the pH value of the environment can be as high as 12-14). The apparent defoaming and antifoaming properties have obvious advantages over ordinary non silicon defoamers. Especially for the foam that tends to be solid, it has excellent elimination and inhibition.
2. Typical data
Appearance: white milky uniform liquid
PH value: 6-9
Density: 0.9-1.10g/ml
3. How to use
The product can be directly added to the system to be defoaming, and the specific amount is obtained according to the field experiment. It is recommended to use a flowmeter for regular quantitative continuous addition.
If you want to control the drop amount, you can dilute the product, simply add water to the defoaming agent and mix it slowly. The defoamer after dilution should be used as soon as possible. Generally, it should not be stored for more than 12 hours.
The dropping point of defoamer should be determined according to the specific production conditions. The best dropping point should always be improved by adding less defoamer
4. Packaging
This product is packed in 25kg, 120kg, 200kg large mouth plastic barrel and 200kg small mouth plastic barrel.
5. Storage
This product is suitable for storage at room temperature, not near the heat source or in the sun. Do not add acid, alkali, salt and other substances to this product. When not in use, the container shall be sealed to avoid harmful bacteria pollution. The storage period is half a year. If there is stratification after long-time storage, it shall be stirred evenly without affecting the use effect。
6. Product safety
This information is based on the knowledge and experience of FICON chemical (Shanghai) Co., Ltd. at present. The application or use suggestions we provide are for your reference only. Therefore, when you use this product, you should carry out tests to determine the suitability of this product for your specific use. If you need product standard, please contact our company, but the typical product data should not be regarded as product standard. Our company guarantees that the products provided will meet the product standards at that time. For the losses caused by the non-compliance with the product standards, our company can bear the responsibility of returning the payment or replacing the products. The company can provide chemical safety technical specifications upon request. This information is subject to change without notice.
